How To Set Up A Salt Water Aquarium
Like every worthwhile venture, you should be prepared to invest time and money into owning a saltwater aquarium – It is like owning a cat or a dog. It is well worth the effort when you consider the magic and the beauty it brings into the place where it is put.
A saltwater aquarium presents to the marine enthusiast, a close up view of an ecosystem and a new admiration of its delicate ocean creatures and array of spectacular fish.
The advisable thing to do each time you are embarking on something new is to do research on the subject area. In contrast to freshwater aquariums, Saltwater aquariums abide by a different set of requirements. In spite of what you may have been told, keeping a saltwater aquarium has become easier over the last thirty years. All it takes, is getting the right information to ensure a successful saltwater aquarium.
The fun times begin after you have finished your research, after you have picked the position of the aquarium, the tank size and have purchased all of the equipment that you will need from the store. Even if it is brand new, the first step is to clean out the tank and you will also need to ascertain for leaks. Do not apply any soap on it. Merely spray it away with a hose since soap residue can have adverse effect on the fish.
The initial step is to assemble the undergravel filter and then lay the substrate on top of it. The substrate is the substance that conceals the bottom of the aquarium. Coloured gravel or coated stones are principally used in a freshwater aquarium. They shouldn’t be used in a saltwater one. Natural coral sand, limestone, oyster shell, and dolomite are the most suitable substrates for a saltwater aquarium.
It is advisable to employ an undergravel filter in a saltwater aquarium but whenever one is employed, you won’t be able to use sand to overlay the aquarium flooring. The filter can easily be congested because the particles are too little. Overlaying the saltwater aquarium flooring is therefore not advisable.
Making a point not to agitate the filter bed or get any gravel underneath the filter plate, fill the aquarium with water about 1/3 of the way up. You are then able to add and set up bigger pieces of rock or coral. Fragile parts of coral don’t require to be added at this time. Then fill the aquarium with tap water till it’s almost 1/2 way full.
Maintaining the correct water conditions is crucial for sustaining a healthy aquarium for saltwater fish. Tap water can comprise several toxins like chlorine or copper that is dangerous to saltwater fish. Consequently, the water should be treated with a high-quality water conditioner prior to mixing in the sea salts. This will destroy chemicals within minutes and make metallic ions nontoxic. A few brands of sea salt carry water conditioners in them which gets rid of a step for you. Add the sea salt at this time then, fill the tank within a few inches from the top.
You will need to complete assembling the filters and heaters, ahead of adding the fish. Undergravel filters can sustain a fewer number of fish but, an exterior filter in addition to the one beneath the gravel will help ensure optimal water quality. A heater must as well be added to the tank at this time. Heaters guarantee that the temperature of the water is kept within a specified range.
Additional equipment that needs to be set up at this time is the air diffuser, the protein skimmer and the florescent light hood. Leave the filter to work for about 24 hours before you add any fish to allow for the sea salts to dissolve and to give yourself time to set the temperature of the tank as needed.
A clean tank was once believed to be the best thing for a saltwater aquarium. However, saltwater aquarium hobbyists now recognize the crucial part algae plays in the operation of a well functioning, healthy tank.